Paragon Fusion-8 Glass Fusing Kilns

SKU: P20-FUSION8 $1,076.00

This is a drop ship item, please contact us to order so we can provide a shipping quote

---

Paragon Fusion-8 Glass Fusing Kiln

The 8-sided Fusion-8 will open a world of creativity for you. Fire silk-screening on glass and decals, paint with frit and stringers, fuse recycled bottles. Experiment with glass weaving. Make kiln loads of glass pendants.

Even Heat Distribution from the Top and Sides

The Fusion-8 firebrick lid heating elements are seated in pinless grooves. A sidewall element, which is protected in recessed firebrick wall grooves, adds to temperature uniformity. The standard insulating firebrick top can be upgraded to the optional deluxe ceramic fiber top. The fiber top is noted for keeping the kiln interior especially clean. Both tops have the same pinless element grooves.

18�" Tall Stand, Galvanized Base Plate

An 18�" tall stand comes standard with the Fusion-8. The stand raises the kiln to a comfortable height for loading and operation. A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

Optional Glass Window

Many people consider the optional high temperature glass 1�" x 3�" window to be indispensable. You can watch every stage of fusing and slumping, from softening, to tack fuse, to full fuse, through the window at your convenience. By watching the glass, even beginners can fine-tune a digital program for precise results. When you see the glass fuse the way you had envisioned, write down the temperature shown in the display for future firings. (Always wear firing safety glasses while watching the glass through the window. We recommend green #3 glasses.)

Dual Mechanical Relays

The Fusion-8 has dual mechanical relays for extra reliability. They send power to the elements on signal from the digital controller. Two relays last longer than the single relay of some competitive kilns because less amperage goes through each relay.

Optional Deluxe Mercury Relay

Order your new kiln with the quiet, reliable mercury relay instead of the standard mechanical relays. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays far outlast the standard mechanical relays and are optional on new kilns.

Basic Fusion-8 Features

The Fusion-8 is 11�" deep and includes a heating element in the sidewalls. Enjoy enhanced heat control with fusing, slumping, and embossing. The Fusion-8 fires on 240 volts.

• Heating elements in top with pinless element groove
• Heating element in the sidewalls of the Fusion-8
• �¼�" heavy duty sheathed Type-K thermocouple
• 2 �½�" insulating refractory firebrick in walls and bottom; 3�" firebrick lid
• Lock-in lid support
• Full-formed galvanized steel base
• Louvered switch box, heavy duty wiring
• Switch box is sloped for comfortable operation of the controller
• Tapered peephole with plug for a wide view

Digital Accuracy

The digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation. The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold. Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns  

• Design programs with up to 8 segments (steps) in Ramp-Hold mode.
• Fire to a single temperature at a single speed in the simplified Single Speed mode.
• Ramp-Hold mode can store 4 programs.
• Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
• Add Hold Time during firing without having to stop the kiln to reprogram.
• Control both heating and cooling in Ramp-Hold.
• Program Review lets you check the program you are about to fire.
• Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
• Temperature display throughout firing and cooling in your choice of �°F or �°C
• Thermocouple Offset adjusts the thermocouple readout.
• Set the Delay to turn on the kiln later to suit your schedule.
• Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
• 12 Month Warranty
• LED Lights show whether you are in program, review, or firing mode.
• Colorful, illustrated instruction manual. Download it from the �"Additional Information�" section below to review these features in more detail.

 

Sheathed Thermocouple

The thermocouple senses temperature inside the kiln. The Fusion-8 comes with the �¼�" Type-K, which is hermetically sealed in a high-nickel metal sheath for long life.

Detailed Instruction Manuals

Included with your kiln is a 28-page controller instruction manual, a quick start programming guide, a 48-page glass manual, and blank firing record sheets. The manuals have been painstakingly researched and are written in plain English, printed in two colors, and are fully illustrated.

Wooden Crate at No Extra Charge

To reduce freight damage, Paragon ships the Fusion-8 in a custom-built, carrier-approved wooden crate rather than the cardboard box that some of our competitors use. Because Paragon is in the central U.S. along a major shipping route, our shipping cost is often lower than that of our competition. We pass this savings on to you.  

add to wishlist